Home
Service Department
Process Optimization Device
Nozzles and Feeders
P.M.D.
Machine Rebuild
Vacuum Pump Rebuild
Spare Parts
Monitor Kits
IP - QP Feeders
Feeder Calibration
Feeder Parts
CP 7 & CP 8
CP 6
CP 4
CP 2 & CP 3
QP 3
QP 2
NP 153
IP 3
IP 1 & IP 2
GL1, GL2 & GL5
Panasert Machines
Universal GSM
SMD 3 Vision System
 
 
P.O.D. Calibration Service
<<Prev | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | Next>>
CP643 Machine
Below are results from a CP643 machine with multiple mechanical and offset problems. A
baseline board was run, then inspected and analyzed with the P.O.D. system. Once the service
engineer analyzed the board and repaired/adjusted the mechanical issues, offsets were then
generated for the machine by the P.O.D. A final board was run to verify machine capability.



<<Prev | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | Next>>
 
SMT Research Inc.
37575 North Hwy 59
Lake Villa, IL 60046
Phone: (847) 587-7200
Fax: (847) 587-7851
info@smtresearch.com		 SMT Research Inc.
Service Center
103 W. Washington St.
New London, IA 52645
Phone: (319) 367-5000
Fax: (319) 367-5155		 Home | Overview | Contacts | Downloads | Comments
Content © 2000-2008 SMT Research, Inc. - All rights reserved
Web Development by Attilanet Corporation